Da-Vinci VTOL sUAS

Da Vinci multi-rotor system is the new UAS hexacopter from Flying Production. The De Vinci was developed in order to provide the market with the most advanced tactical aerial observation system support.

Flight modes & camera control:
  • Takeoff – fully autonomous takeoff is performed using the takeoff command. When the takeoff command begins, the throttle increases smoothly until the autopilot detects the Off Ground’ state. This terminates the takeoff command and activates the next command in the fly file.

  • Camera Guide – the Da Vinci drone will follow the heading of the camera and will decrease the range between the drone and the target.

  • Program (predefine waypoint navigation) – The Da Vinci will follow the programmed pattern and waypoint (altitude, speed and special actions can by defined at each point).

  • Fly To – the UAV will automatically fly to a designated coordinate and will hover above that point.

  • Hover – the UAV will stay over the relevant coordinate (GPS accuracy).

  • Return Home & Land – the UAV will return with a direct flight route to the predetermined landing point or to the takeoff location.

  • Manual Mode – the operator can control the GPS location of the drone via the stick on the control unit. The drone will stables itself automatically, no RC flight skills needed.

  • Point To – The camera will point to the desired location on the map.

  • Manual payload mode – the operator can manually steer the payload.

SPECIFICATIONS
Altitude AGL........................30-1500 ft
Range............................10 km (radius)
Operational speed................0-32 kph
Max speed.................................45 kph
Weight without payload..........11.5 kg
Max operational payload..........3.5 kg
Endurance.......................up to 90 min